Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

The tire pressure warning indicates a loss of pressure with possible puncture on one or more tires; let's see how to reset the TPMS sensors on the Toyota RAV 4. Before performing the reset operation, it is necessary that all four tires are at the correct pressure; then we get into the car and start the instrument panel. At this point, we press and hold the TPMS reset button found at the bottom on the driver's side, under the steering wheel; we wait for the tire pressure warning to flash until it resets completely!

Posted on 27 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning on the Toyota RAV4
How to reset the tire pressure warning on the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The tire pressure warning on the dashboard indicates a possible loss of pressure or puncture on one or more tires; let's see how to reset the TPMS se…
How to reset the tire pressure warning on the Toyota RAV 4
How to reset the tire pressure warning on the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide we will see the instructions that will allow us to reset the tire pressure warning of the Toyota RAV 4; before performing the TPMS sens…
How to reset the tire pressure sensor on the Toyota RAV4
How to reset the tire pressure sensor on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The activation of the tire pressure warning indicates a loss of pressure or possible puncture on one or more tires; let's see how to reset the TPMS s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos