Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the air filter of the Toyota IQ

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the engine air filter of the Toyota IQ. First, we open the hood of the car and start disconnecting the air intake hose, releasing the two metal tabs to access the air filter; we then remove the cartridge found inside, as shown in the video.

At this point we install the new air filter, as well as the original one; we insert the filter in the correct direction, finally reassembling the cover and securing the two side metal tabs.


Posted on 8 May 2025 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Toyota IQ
Toyota Iq (2008-2015 / MK 1) To remove the air filter on a Toyota IQ: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard,…
How to Replace Oil and Filter on a Toyota Iq
How to Replace Oil and Filter on a Toyota Iq
Toyota Iq (2008-2015 / MK 1) How to replace oil and filter on a Toyota Iq? Let's see the replacement. Open the car door and pull up the engine compartment release lever located a…
How to Replace the Cabin Filter in a Toyota IQ?
How to Replace the Cabin Filter in a Toyota IQ?
Toyota Iq (2008-2015 / MK 1) As shown in this tutorial, replacing the cabin filter in a Toyota IQ is a very simple and economical task. First, sit in the passenger seat, then uns…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos