Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Toyota IQ?

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

Video tutorial

As shown in this tutorial, replacing the cabin filter in a Toyota IQ is a very simple and economical task. First, sit in the passenger seat, then unscrew the fastening bolt of the cover located under the dashboard.

Grip it from the bottom, pull it towards you, and unclip it. Next, locate the long rectangular flap, open it, and remove the old filter. At this point, clean the inside of the housing from any debris, insert the new filter, and reassemble everything by following the reverse procedure.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Replacement of the air filter of the Toyota IQ
Replacement of the air filter of the Toyota IQ
Toyota Iq (2008-2015 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the engine air filter of the Toyota IQ. First, we open the h…
How to Replace Oil and Filter on a Toyota Iq
How to Replace Oil and Filter on a Toyota Iq
Toyota Iq (2008-2015 / MK 1) How to replace oil and filter on a Toyota Iq? Let's see the replacement. Open the car door and pull up the engine compartment release lever located a…
How to Change the Oil and Filter on a Toyota Iq
How to Change the Oil and Filter on a Toyota Iq
Toyota Iq (2008-2015 / MK 1) How to change the engine oil and filter on a Toyota Iq? Start by opening the car door and pulling up the engine compartment release lever located at …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos