Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Oil and Filter on a Toyota Iq

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

How to replace oil and filter on a Toyota Iq? Let's see the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Unscrew the oil cap on top of the cylinder head; lift the car on a jack and unscrew the bolt from the oil sump; let the fluid drain into a container.

Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located. Remove the ventilation filter kit to access the filter and extract the worn oil filter, then position a new one. Finally, top up with the new fluid.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Change the Oil and Filter on a Toyota Iq
How to Change the Oil and Filter on a Toyota Iq
Toyota Iq (2008-2015 / MK 1) How to change the engine oil and filter on a Toyota Iq? Start by opening the car door and pulling up the engine compartment release lever located at …
How to Change the Engine Oil in the Toyota IQ?
How to Change the Engine Oil in the Toyota IQ?
Toyota Iq (2008-2015 / MK 1) To change the engine oil in the Toyota IQ, lift the car using a jack and access the underside to loosen the protective plate under the vehicle. This …
How to Replace the Cabin Filter in a Toyota IQ?
How to Replace the Cabin Filter in a Toyota IQ?
Toyota Iq (2008-2015 / MK 1) As shown in this tutorial, replacing the cabin filter in a Toyota IQ is a very simple and economical task. First, sit in the passenger seat, then uns…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos