Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Filter on a Toyota Iq

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

How to change the engine oil and filter on a Toyota Iq? Start by opening the car door and pulling up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet; remove the cap on top of the engine. Lift the car on a jack (or column lift) and use a socket spanner to undo the large securing bolt of the container where the oil filter is located (remove the worn oil filter) and fit a new one. Undo the bolt on the oil sump; allow the fluid to drain into a container.

Finally, top up with new fluid (check the level with the dipstick) and close the bonnet.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Toyota IQ?
How to Change the Engine Oil in the Toyota IQ?
Toyota Iq (2008-2015 / MK 1) To change the engine oil in the Toyota IQ, lift the car using a jack and access the underside to loosen the protective plate under the vehicle. This …
How to Replace Oil and Filter on a Toyota Iq
How to Replace Oil and Filter on a Toyota Iq
Toyota Iq (2008-2015 / MK 1) How to replace oil and filter on a Toyota Iq? Let's see the replacement. Open the car door and pull up the engine compartment release lever located a…
How to Reset the Service Light on a Toyota IQ
How to Reset the Service Light on a Toyota IQ
Toyota Iq (2008-2015 / MK 1) Let's see how to reset the warning light on the instrument panel regarding the service due date, engine oil change, oil filter, and any other routine…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos