Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in the Toyota IQ?

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

To change the engine oil in the Toyota IQ, lift the car using a jack and access the underside to loosen the protective plate under the vehicle. This will allow you to access the oil drain plug, which should be opened by loosening the bolt and collecting the used oil in a container.

Once all the oil has drained, close it with the appropriate plug and pour in new oil from the engine compartment. After adding the oil, check the level with the dipstick.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Toyota Iq (2008-2015 / MK 1) How to change the engine oil and filter on a Toyota Iq? Start by opening the car door and pulling up the engine compartment release lever located at …
Toyota Iq (2008-2015 / MK 1) How to replace oil and filter on a Toyota Iq? Let's see the replacement. Open the car door and pull up the engine compartment release lever located a…
Toyota Iq (2008-2015 / MK 1) In this video, you will learn how to replace the battery in a Toyota IQ key. Open the packaging of the replacement batteries. Open the remote by pres…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos