Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Toyota Highlander?

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure for resetting the tire pressure warning light that appears on the instrument panel of the Toyota Highlander involves inflating the tires until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar.

Once the tires have been properly inflated, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once the panel is turned on, you can press and hold the SET button located under the steering column to completely reset the warning light.


Posted on 25 May 2025 by ScegliAuto


Related tutorials

Tyre Pressure Reset on a Toyota Highlander
Tyre Pressure Reset on a Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this guide, you will see how to reset the tyre pressure warning light on a Toyota Highlander, model produced from 2014 to 2019, in just a few simp…
How to reset the tire pressure light on a Toyota Highlander?
How to reset the tire pressure light on a Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) To reset the tire pressure light on a Toyota Highlander, start by turning on the instrument panel without starting the engine. Look for the tire pres…
How to reset the tyre light on a Toyota Highlander?
How to reset the tyre light on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will learn how to reset the tyre light on a Toyota Highlander, a very simple and quick operation, to be performed only after re…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos