Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Toyota Corolla 2020 key.

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Key

Let's see how to replace the battery of the key/remote of a 2020 Toyota Corolla. Let's get a button battery of the CR2032 type right away, which we can find at any supermarket or electronics store, or online like the youtuber did. We will also need a small flathead screwdriver. On the top of the remote (where the key ring is) we will find a lever that we will slide to the right: lift the key ring and remove the physical key, pry between the two halves of the remote to open it and inside we will find the button battery. Change it, paying attention to the polarity, then close the cover and put the physical key back in place. Operation completed.

Posted on 4 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2000-2007 / MK 2) The steps to replace the battery of the Toyota Corolla remote control are simple and quick to perform. Before proceeding, let's get a CR 2032 model b…
How to replace the battery of the Toyota Corolla 2022 key
How to replace the battery of the Toyota Corolla 2022 key
Toyota Corolla (2019-2026 / MK 5, E210) If you do not know how to replace the battery inside the key of your 2022 Toyota Corolla, do not worry because below you will find all the steps you …
How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2013-2019 / MK 4, E170, E160) Replacing the battery of the Toyota Corolla key is a simple and quick operation that can be done independently using just a flathead screwdriver. To …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos