Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic transmission of the Toyota Highlander

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Drivetrain

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to reset the automatic transmission of the Toyota Highlander. In order to reset the transmission, it is necessary to use a specific programming tool, to be connected to the OBD port of the vehicle; turn on the instrument panel to allow it to communicate with the engine control unit.

At this point, follow the guided procedure to adapt the automatic transmission control unit, performing a real reset; finally, disconnect the tool and check the operation of the automatic transmission!


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to Manually Disable the Traction Control on 2006 Toyota Highlander
How to Manually Disable the Traction Control on 2006 Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Before proceeding with the guide, remember that manually disabling the automatic traction control system should only be done in cases of serious malf…
How to change the time on the Toyota Highlander
How to change the time on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) If your latest Toyota Highlander does not display the correct time and you want to change it, simply follow this procedure. Once the car is started, …
How to reset the VSC OFF light on the Toyota Highlander?
How to reset the VSC OFF light on the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To reset the VSC OFF light on the Toyota Highlander, turn on the ignition by placing the car in P (for automatic transmission) or in neutral (for man…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos