Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Toyota Highlander?

Model: Toyota Highlander Xu40 - Years 2008-2013
Part:

The tire pressure sensor shown on the Toyota Highlander's instrument panel can be reset by inflating the tires to the recommended pressure value: this value will be indicated on the sticker attached to the driver's side door pillar. Once the tires have been properly inflated, you can press and hold the button to reset the sensor: this button will be located on the lower left side of the dashboard, next to the steering column. By holding it down for a few seconds, you will notice that the warning light disappears from the instrument panel, and then turns off.

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Toyota Highlander?
How do you reset the tire pressure light on the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) To reset the tire pressure warning light on the Toyota Highlander, you will need to inflate the tires to the recommended pressure value, which will b…
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) You can completely clear the tyre pressure warning light on a Toyota Highlander by inflating the tyres to the optimal pressure value: once the tyres …
How to reset the tyre warning light in the Toyota Highlander?
How to reset the tyre warning light in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this video, you can see how to reset the tyre warning light in the Toyota Highlander. This light appears whenever low pressure is detected, for ex…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos