Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Toyota Rav4 key.

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Replacing the battery of the Toyota Rav 4 remote control produced from 2013 to 2018 is a simple and quick operation. To replace the battery, we need to use a screwdriver and a CR2032 3 Volt battery.

The steps to follow are: - Press on the central part of the remote control to remove the top part; - Remove the emergency key contained inside the remote control; - Insert the key inside the remote control in order to apply slight pressure outwards; - Remove the old battery and insert the new one; - Close the remote control; - Insert the key inside; Once all the steps are completed, proceed to test the functioning of the remote control.


Posted on 15 July 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the 2020 Toyota RAV4
How to Replace the Key Battery of the 2020 Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Replacing the battery located inside the key of your 2020 Toyota RAV4 is a very simple task, and you just need to follow the steps described below. F…
How to replace the battery in a Toyota RAV4?
How to replace the battery in a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) This tutorial shows how to replace the battery in a Toyota RAV4, a very simple and quick operation. First, ensure that the key is not in the ignition…
How to Replace the Remote Battery on the Toyota RAV4?
How to Replace the Remote Battery on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial, see how to replace the remote battery on the Toyota RAV4, a very simple and quick operation. For this, you will need a small flathe…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos