Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Toyota C-HR?

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part:

To completely remove the tire pressure warning light from the instrument panel of the Toyota C-HR, first check that all tires are at the correct inflation pressure. Once the pressure has been checked, it will be necessary to go inside the car and turn on the instrument panel. You will need to navigate the menu using the directional arrows and the OK button located on the right side of the steering wheel. Here, you will need to select the tire option and then select the reset option. After a few seconds, the warning light will start flashing and then automatically turn off.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota C-HR?
How to reset the tyre pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To reset the tyre pressure warning light on the Toyota C-HR, first ensure all tyres are at the correct inflation pressure. Once the pressure is verif…
How to Reset the Tyre Pressure Warning Light on the Toyota C-HR?
How to Reset the Tyre Pressure Warning Light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) The procedure to reset the tyre pressure warning light on the Toyota C-HR involves turning on the instrument panel so that you can press the designat…
How to reset the tire pressure sensor on the Toyota CH-R
How to reset the tire pressure sensor on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Toyota CH-R; before performing the reset, it…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos