Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Restoration of Toyota's pre-collision system malfunctions.

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Onboard computer

This video describes the essential steps to restore the pre-collision system on a Toyota vehicle. Common causes of malfunction can be dirty or obstructed radar sensors or camera (located behind the Toyota emblem); weak or unstable battery, or wiring problems. But it could also be a temporary error. So it is important to clean the sensors, cleaning the Toyota logo well, and the camera located on the windshield; check that the battery has a stable voltage, and check the functionality of the dedicated fuses. If the warning persists, turn on the ignition, press the "menu" button and navigate to "PCS settings", where we will select "reset PCS" and confirm. Turn off the ignition and then turn it back on for verification.

Posted on 8 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to activate and deactivate the Pre-Collision System of the Toyota Corolla
How to activate and deactivate the Pre-Collision System of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) For illustrative purposes, in this guide we will see the information that will allow us to disable the Pre-Collision System and traction control of t…
How to Replace the Key Battery on a Toyota Corolla
How to Replace the Key Battery on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Often, various malfunctions of the car key are simply due to a flat battery. Unlike many other car key models, for the Toyota Corolla, it is not nece…
Where is the Fuse Box Located on the Toyota Corolla Mk3?
Toyota Corolla (2006-2013 / MK 3) In case of faults or malfunctions of one or more electrical components in your Toyota Corolla Mk3 (2006-2013), you can directly address their respect…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos