Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate and deactivate the Pre-Collision System of the Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Checks and maintenance

For illustrative purposes, in this guide we will see the information that will allow us to disable the Pre-Collision System and traction control of the Toyota Corolla; it is recommended to never disable the Pre-Collision System and traction control as it could compromise driving safety. Let's get into the car and start the engine; then press and hold the traction control button, located in front of the gear lever, for about three seconds, as shown in the video. Then we will see the information appear on the dashboard display indicating that the controls have been temporarily disabled.

Posted on 19 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Restoration of Toyota's pre-collision system malfunctions.
Restoration of Toyota's pre-collision system malfunctions.
Toyota Corolla (2019-2026 / MK 5, E210) This video describes the essential steps to restore the pre-collision system on a Toyota vehicle. Common causes of malfunction can be dirty or obstru…
How to activate and deactivate the parking sensors of the Toyota Corolla
How to activate and deactivate the parking sensors of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) These short and simple instructions will show us how to enable and disable the parking sensors of the Toyota Corolla. First, we get into the car and …
How to Disable Traction Control on a Toyota Corolla?
How to Disable Traction Control on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To disable the traction control on the Toyota Corolla, turn on the instrument panel by rotating the key in the ignition switch: once the panel is on,…

Other guides you may be interested in

    Frequently Asked Questions

    • Corolla 2013-2019 - Why is the Toyota Corolla heater not working? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos