Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Wheel Trims on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to remove and replace the wheel trims (plastic hubcaps) on a Toyota Yaris. Use a screwdriver to pry or use your hands; detach the hubcap (lever with a screwdriver) from the wheel rim. Take the new hubcaps and fit the metal securing clips, then install the hubcaps: place them over the wheel rim and gently tap the hubcaps until they are fully secured.

Use the same method for fitting the other hubcaps (use plastic ties to ensure they don’t come off while driving).


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Removing the Wheel Trims from a Toyota Yaris
Removing the Wheel Trims from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) .. Hello, today I will explain how to remove and replace the wheel trims on a Toyota Yaris, but this process generally applies to all.. …
How to replace the hubcaps of a Toyota Yaris
How to replace the hubcaps of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video we can see how to replace the wheel covers of a Toyota Yaris: the measurement should be taken from the lower lip of the rim. However, t…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos