Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

In the Toyota Auris Hybrid, how do you replace the power battery?

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

The 12-volt power battery of the Toyota Auris Hybrid is comparable in characteristics to that of most circulating cars, the difference is noticed in the point where it is housed, namely not in the engine compartment, as often happens, but in the trunk, on the right side.

Let's see the practical steps of the replacement work: disconnect the two cables, positive and negative, respectively black and red, remove the locking bracket and remove the battery from its seat.

Insert the new one and perform the reverse operation as previously described.


Posted on 5 October 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Auris Hybrid?
How to Replace the Battery in a Toyota Auris Hybrid?
Toyota Auris (2018-2024 / E210) To replace the battery in a Toyota Auris Hybrid, loosen the screws that secure the rear seat bench to its housing. Once these screws are loosened, yo…
Where to find the fuse diagram of the 2018 Toyota Auris Hybrid?
Where to find the fuse diagram of the 2018 Toyota Auris Hybrid?
Toyota Auris (2012-2018 / E180) The fuse diagram of the 2018 Toyota Auris Hybrid, presented analytically in the video here, provides details about the positioning of each fuse in th…
What is the fuse diagram for the Toyota Auris Hybrid?
What is the fuse diagram for the Toyota Auris Hybrid?
Toyota Auris (2007-2012 / E150) This video shows where the fuse boxes are located in the Toyota Auris Hybrid and their corresponding diagrams, useful if you need to check the fuses …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos