Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to code the injectors of the Toyota Hilux

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Fuel injectors

In this guide, we will see information related to the coding of injectors for the Toyota Hilux. The replacement of injectors in fact includes, in most vehicles, their subsequent coding; in order to carry out this operation, it is necessary to use a tool with dedicated software (in this case, the Autel tool is used for programming injectors). After scanning the vehicle's ECU, it will be possible to code the new injectors installed (by clicking on injector compensation), all after having already replaced the injectors.

Posted on 9 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the injectors of the Toyota Hilux?
How do you replace the injectors of the Toyota Hilux?
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) In order to replace the injectors of the Toyota Hilux, you need to open the hood so that you can access the components inside the engine compartment:…
Where are the Fuses Located on the Toyota Hilux?
Where are the Fuses Located on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) The designated fuse boxes installed inside the Toyota Hilux contain the fuses responsible for the operation of the devices mounted on the vehicle: in…
How do you reset the tire pressure warning light on the Toyota Hilux?
How do you reset the tire pressure warning light on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the tire pressure warning light of the Toyota Hilux, you need to inflate the tires until they reach the recommended pressure value: this val…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos