Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on a Toyota Hilux?

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel injectors

See other generations:
Video tutorial

To replace the injectors on a Toyota Hilux, open the hood to access the components in the engine bay. Start by removing any obstructing components above the engine block, and then remove the upper cover panel. Once the engine is open, locate the screws that secure the injectors.

Unscrew the screws to remove the injectors. After that, close the engine and check that everything is functioning properly.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to code the injectors of the Toyota Hilux
How to code the injectors of the Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this guide, we will see information related to the coding of injectors for the Toyota Hilux. The replacement of injectors in fact includes, in mos…
Where are the Fuses Located on the Toyota Hilux?
Where are the Fuses Located on the Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) The designated fuse boxes installed inside the Toyota Hilux contain the fuses responsible for the operation of the devices mounted on the vehicle: in…
Where to Find the Fuse Box of the 2012 Toyota HiLux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) If you have a 2012 Toyota HiLux and don't know where the fuse box is located, follow the steps below to find it easily. First, make sure you have par…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos