Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to opening the engine hood of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will see the instructions that will allow us to open the engine hood of the Toyota Yaris, in simple steps. First, we open the front door on the driver's side and start pulling the hood release lever that we find at the bottom, thus unlocking the latch; then we move to the front of the vehicle and release the latch located in the middle of the engine hood, as shown in the video.

We then lift the engine hood and lock it with the side rod, in order to work on the engine compartment; finally, we lower the engine hood to close it again.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Toyota Yaris
How to Open the Bonnet of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide provides instructions on how to open the bonnet of the Toyota Yaris by following these simple and quick steps. First, get into the driver'…
How to Open the Boot and Bonnet of the Toyota Yaris Hybrid MK4
How to Open the Boot and Bonnet of the Toyota Yaris Hybrid MK4
Toyota Yaris (2020-2026 / MK 4) In today's video, you will see some key details of the fourth series Toyota Yaris Hybrid; specifically, you will learn how to open the boot and the b…
How to Open the Bonnet of the Toyota Yaris
How to Open the Bonnet of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) The following steps will show you how to open the bonnet of the Toyota Yaris in a few simple moves. First, open the driver's side front door and pull…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos