Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to remove the diesel filter mounted on a Toyota Yaris

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Diesel filter
Operation: How to remove the diesel filter mounted on a Toyota Yaris

Let's see how to remove the diesel filter mounted on a Toyota Yaris: we lift the car on a column bridge or a special jack (if necessary), we identify the diesel filter and with a socket wrench we unscrew the locking pins placed above the plate ( we can also use a fixed wrench), remove the same placed near the container where the diesel filter is located. We remove the filter container from the car (replace it with a new one). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood.


Posted on 8 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel filter of the Toyota Yaris located? Read Answer
    • Yaris 1999-2005 - Where is the Toyota Yaris diesel filter located? Read Answer
    • Yaris 2005-2011 - Where is the Toyota Yaris diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos