|
Do it yourself
| |||
| ||||
How to reset the tire warning light on a Toyota Tacoma pickup?
Model: Toyota Tacoma
N240, N220, N250, MK 2, N270, N260
- Years 2005-2015
In this tutorial, we will see how to reset the tire warning light on the Toyota Tacoma pickup, a very simple and quick operation that should be done only after restoring the correct pressure in each tire according to the instructions in the manual. First, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, locate the button that features both the icon of the warning light in question and the word "SET," which is positioned in the lower area of the dashboard on the driver's side, and hold it down for the time necessary for the warning light to disappear from the panel.
Posted on 7 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Tacoma
(2016-2026 /
N300)
In this tutorial we can see how to reset the tire pressure light in the Toyota Tacoma pick-up truck, an extremely simple and quick operation, to be c…
Toyota Tacoma
(2016-2026 /
N300)
In this tutorial, we can see how to reset the tire light on the Toyota Tacoma pickup truck. This is a very simple and quick operation, to be done onl…
Toyota Tacoma
(2005-2015 /
N240, N220, N250, MK 2, N270, N260)
In this tutorial, we can see how to reset the tire pressure light in the Toyota Tacoma pickup, a very simple and quick operation, to be done only onc…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.095
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
