|
Do it yourself
| |||
| ||||
How do you reset the tire pressure warning light on the Toyota Yaris?
Model: Toyota Yaris
Xp90
- Years 2005-2011
To completely turn off the tire pressure warning light that appears on the instrument panel of the Toyota Yaris, you must first inflate the tires that are at insufficient pressure. The correct pressure value to inflate the tires can be found on the sticker attached to the driver's door pillar. Once all the tires are at the correct pressure, you need to go inside the cabin, turn on the instrument panel, and press the button located under the steering column. This way, the light will blink until it eventually turns off completely.
Posted on 16 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Yaris
(2020-2026 /
MK 4)
In order to reset the tire pressure warning light on the Toyota Yaris, you will need to inflate the tires until they are brought back to the correct …
Toyota Yaris
(2011-2019 /
Xp130)
Even the Toyota Yaris, in its most recent versions, is equipped with tire pressure monitoring sensors. They are installed in the tire and signal when…
Toyota Yaris
(2020-2026 /
MK 4)
Good morning, today we will focus on the procedure to reset the "Service" light of our Toyota Yaris. Before proceeding, it is essential to make sure …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
