Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Service warning light

You can reset the Service light on the instrument cluster of the Toyota Auris by turning on the ignition, ensuring the light with the spanner is displayed on the instrument panel. At this point, turn off the ignition and press and hold the TRIP button located on the right spoke of the steering wheel. While holding it down, turn the key to the ON position: this will cause the remaining kilometres until the next maintenance to start flashing until they are reset. This way, the Service light will be completely cleared.

Posted on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota Auris?
How to Reset the Service Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) Thanks to this video, you can learn how to reset the service light on all Toyota Auris vehicles produced between 2013 and 2018. First, turn on the in…
How do you reset the Service light of the Toyota Auris?
How do you reset the Service light of the Toyota Auris?
Toyota Auris (2012-2018 / E180) The procedure to reset the Service light of the Toyota Auris involves turning on the instrument panel, checking that the light with the wrench is pre…
How do you reset the service light in the Toyota Auris?
How do you reset the service light in the Toyota Auris?
Toyota Auris (2007-2012 / E150) If you need to reset the service light of your Toyota Auris, after it has turned on due to the approaching service deadline, you can follow this shor…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos