Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning on a Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Today's information will allow you to reset the tyre pressure warning light on the Toyota Yaris; before calibrating the TPMS sensors, ensure that all four tyres are at the correct operating pressure. Then, get in the car and turn on the ignition; next, navigate to the settings on the onboard computer using the steering wheel controls, and then select the TPMS option (entering the pressure monitor), as shown in the video.

At this point, confirm and perform the recalibration of the TPMS sensors, thus resetting the warning on the dashboard!


Posted on 14 April 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Toyota Yaris.
How to reset the tire pressure warning light on the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) These brief and simple steps will illustrate how to reset the tire pressure warning for the Toyota Yaris. Before performing the reset of the TPMS sen…
How to Reset the Tyre Pressure Warning on the Toyota Yaris
How to Reset the Tyre Pressure Warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This brief and simple information will show you how to reset the tyre pressure warning on the Toyota Yaris; before performing the TPMS sensor reset, …
How to restore the tire pressure warning on the Toyota Yaris
How to restore the tire pressure warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below we will discover the information that will allow us to reset the tire pressure warning of the Toyota Yaris; before performing the reset of all …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos