Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Service Reset on a Toyota C-HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Service warning light

Today, you will learn how to perform the oil service reset on a first-generation Toyota C-HR (2016-2023). Start the reset procedure by turning on the vehicle's ignition without starting the engine, then press the "TRIP" button located on the right side of the steering wheel until the "TRIP A" screen appears on the information display, then turn off the ignition. Next, press and hold the "TRIP" button and turn the ignition back on; continue to hold the "TRIP" button until the TRIP A reset is shown in the video, then restart the vehicle to complete the task.

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the Toyota C-HR
How to Reset the Service on the Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To reset the services on the Toyota C-HR, first turn on the ignition. Then, using the trip button located on the steering wheel, click until the trip…
How to Reset the Tyre Pressure Light on a Toyota CH-R?
How to Reset the Tyre Pressure Light on a Toyota CH-R?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) In this tutorial, you will learn how to reset the low tyre pressure light on a Toyota CH-R. This operation should only be performed after restoring t…
How to Reset the Service Light on the 2019 Toyota C-HR
How to Reset the Service Light on the 2019 Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) After completing the required service for the vehicle, you need to reset the service light; this can be done in the workshop using diagnostic equipme…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos