Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Proace

Model: Toyota Proace Verso MK 1 - Years 2016-2026
Part:

Let's see how to reset the tyre pressure light on a Toyota Proace Verso: turn on the instrument cluster by putting the key to "ON", then from the multimedia screen press the "auto" button and select "tyre pressure" from the submenu. Confirm with "yes" and the light will turn off immediately. However, there are additional details to know: if the light is flashing, it indicates a sensor fault, which could also be the sensor's battery running low (this can happen after about 5 years of tyre life). If the light is steady, it indicates low pressure in one or more tyres. Before resetting, it is important to physically check the pressure on all tyres, referring to the recommended pressures from the manufacturer, which can be found on the driver's door pillar.

Posted on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota Proace?
How to reset the tyre pressure warning light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the tyre pressure warning light on the Toyota Proace, first inflate the tyres to the correct pressure value: this value is indicated on the …
How to Reset the Tyre Pressure Light on the Toyota Proace?
How to Reset the Tyre Pressure Light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) The procedure to reset the tyre pressure light on the Toyota Proace requires first inflating all the tyres to the correct pressure value: this value …
How to Reset the Tyre Pressure Warning Light on the Toyota Proace?
How to Reset the Tyre Pressure Warning Light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) From the dashboard of the Toyota Proace, you can completely clear the tyre pressure warning light by first inflating the tyres until they reach the c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos