Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair and Reset the EPS Warning Light (Electric Power Steering)

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

The electric power steering (EPS) helps you turn the steering wheel with less effort. If the warning light is on, it means the system is malfunctioning or at least partially disabled, making the steering very heavy at low speeds, while at high speeds the risk is lower, but in an emergency, you may not have the necessary steering responsiveness.

Therefore, avoid long journeys and take the vehicle to a mechanic. The light may come on due to a temporary error, so try turning the vehicle off and on several times.

The problem could also be a low voltage battery, or corroded or loose cables. Faulty terminals or a blown fuse can also be an issue.

Don't overlook low tyre pressure either. To reset the light, turn the steering wheel fully to the right, then fully to the left, and finally back to the centre.

Turn off and restart the vehicle and check if the light has gone out.


Posted on 21 June 2026 by ScegliAuto


Related tutorials

When to Change the Timing Belt on the Toyota Rav4 Diesel
When to Change the Timing Belt on the Toyota Rav4 Diesel
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The timing belt should be replaced every 75,000 miles or every 5 years, as its failure could cause irreparable damage to the engine. To carry out thi…
How to Repair the Door Lock on a Toyota RAV 4
How to Repair the Door Lock on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide outlines the steps to dismantle and repair the door lock on a Toyota RAV 4. First, open the front door and start removing the door panel b…
How to Reset the "Service" Light on a Toyota RAV4
How to Reset the "Service" Light on a Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the "Service" light on a Toyota RAV4, turn on the ignition without starting the engine. Use the buttons on the steering wheel to navigate to…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos