Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Camry

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the maintenance light on a Toyota Camry, turn the ignition on without starting the engine and ensure that the total odometer display shows ODO. Then turn off the ignition. Press and hold the ODO/TRIP button, then turn the ignition back on without starting the engine.

Continue holding the button while the display shows a countdown or the indicators start to flash. Wait for the sequence to complete until 000000 appears or a confirmation message indicates the reset.

At this point, release the button and turn off the ignition. Turn it back on to verify that the maintenance warning has been cleared and that the new service interval has been saved.


Posted on 22 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Toyota Camry?
How to Reset the "Service" Light on a Toyota Camry?
Toyota Camry (2018-2024 / Xv70) To reset the "Service" light on a Toyota Camry, turn on the ignition without starting the engine. Use the buttons on the steering wheel to access the…
How to Reset the Service Light on the Toyota Camry
How to Reset the Service Light on the Toyota Camry
Toyota Camry (2018-2024 / Xv70) In this guide, you will learn how to reset the oil change service light on the Toyota Camry. First, get inside the vehicle and start the engine. Then…
How to Reset the Service Light on a 2023 Toyota Camry
How to Reset the Service Light on a 2023 Toyota Camry
Toyota Camry (2018-2024 / Xv70) Today, you will learn how to reset the service light on a 2023 Toyota Camry. To reset the light, press the Menu button on the steering wheel to acces…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos