Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove a Rear Seat

Model: Toyota Prius MK 1 - Years 2004-2009
Part: Rear bench seat

This first part of the video explains the procedure for removing the rear seat of a Toyota Prius to install a hybrid battery. After illustrating the battery and the necessary tools (ratchet with extensions and sockets of 8, 10, 12 mm), open the boot, remove its "floor" and the panel near the headrest. Also, remove the side panels. Unscrew and take out the left side tray, and with your hands, detach the lower edge of the boot. Proceed to remove the rear seat cushions and detach the entire assembly. Using a 14 mm socket, unscrew the bolts securing the lower part of the rear seat. After removing the seats, look for space to accommodate the battery, then using the ratchet, unscrew the two bolts as shown in the video and remove the plastic board. With a 10 mm socket, also unscrew the bolts securing the left side panel and remove it. Remove the right panel using the 10 mm socket as well.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Prius (2016-2023 / MK 3, Xw50) Below are the instructions that will allow us to disassemble and replace the rear seat of the Toyota Prius, in simple and quick steps. First, we open…
Toyota Prius (2009-2015 / Xw30, MK 2) This video illustrates how to easily remove the rear seat from a 2010 Toyota Prius. First, position yourself in the cabin with one leg inside and one…
Toyota Prius (2016-2023 / MK 3, Xw50) In the Toyota Prius, the boot may become stuck, possibly due to a problem with the release button or the lock actuator. In such cases, you can perfor…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos