Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Battery from Toyota Yaris Hybrid

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Battery

In this video tutorial, we will show how to remove the battery from a Toyota Yaris Hybrid. First, the battery is located under the bonnet: to remove it, you need to take an extra step; before disconnecting the terminals (positive and negative), you must disconnect the white connector found inside the fuse box. So, open the fuse box and disconnect the white connector by prying it off. Now unscrew all the screws securing the battery and remove it by disconnecting the terminals. It is recommended for these hybrid vehicles to take them to authorized workshops for battery removal.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the 12V Battery of the Toyota Yaris Hybrid
Guide to Replacing the 12V Battery of the Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) Today, we will look at the instructions that will allow you to replace the 12V battery of the Toyota Yaris Hybrid. First, open the right rear door of…
How to connect the battery starter cables of the Toyota Yaris Hybrid
How to connect the battery starter cables of the Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) In this video, we will see how to correctly connect the cables to restart the starter battery of a Toyota Yaris Hybrid: the positive pole is located …
How to Replace the 12V Battery in a Toyota Yaris Hybrid
How to Replace the 12V Battery in a Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) To replace the 12V battery in the Toyota Yaris Hybrid, move the seat forward to access the area underneath. Locate the cover panel on the floor and r…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - How much does it cost to replace the Toyota Yaris Hybrid battery? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos