Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Flashing Warning Light on Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Let’s reset the flashing warning light on a Toyota Verso. Turn on the instrument panel using the ignition button, check the flashing light, then see how to perform the reset.

Press the button firmly and turn off the instrument panel. Turn on the instrument panel and hold the button until the maintenance reset message appears.

Turn off and on the instrument panel again using the button; the maintenance completion with the mileage will appear. Double-check everything and turn off the instrument panel after setting.

Repeat the procedure if it was unsuccessful.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on the Toyota Verso?
How to reset the tyre warning light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) As shown in this tutorial, resetting the tyre warning light on the Toyota Verso is a very simple and quick operation. Before proceeding, ensure that …
Resetting the tire pressure warning light on the Toyota Verso.
Resetting the tire pressure warning light on the Toyota Verso.
Toyota Verso (2009-2018 / MK 4) Today's guide will show us the instructions for resetting the tire pressure warning light on the Toyota Verso; before resetting the TPMS sensors, it …
How to Reset the Tyre Pressure Warning Light on the Toyota Verso?
How to Reset the Tyre Pressure Warning Light on the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Learn how to turn off the tyre pressure warning light on the Toyota Verso. When you notice the light illuminated, check for any flat or punctured tyr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos