Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Tyre Pressure Light on Toyota Cars

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

This procedure is valid not only for the Toyota C-HR but also for other Toyota models such as the Corolla and Avensis. Start the car and, if you have an automatic gearbox, leave it in "P". Wait about a minute, until the tyre warning light stops flashing and becomes steady.

Using the arrow buttons located on the right side of the steering wheel, scroll through the menus until you reach the settings, then select "Vehicle Settings". Enter the tyre pressure settings and hold down the central button on "Set" for several seconds, as shown in the video.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Toyota CH-R
How to reset the tyre pressure warning light on a Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The steps in this guide will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota CH-R. Before performing the reset, …
Resetting the tire pressure warning light on the Toyota CH-R
Resetting the tire pressure warning light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today we will see the necessary instructions in order to reset the tire pressure warning light of the Toyota CH-R; before performing the TPMS sensor …
Toyota C-HR Reset Tyre Pressure Light
Toyota C-HR Reset Tyre Pressure Light
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Do you want to reset the tyre pressure light? Let's see how to reset the light after turning on the instrument cluster. Turn on the instrument cluste…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos