Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Knob on Toyota Rav 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Shift knob

See other generations:
Video tutorial

Lower the gear gaiter at the junction with the knob. At this point, you will be able to extract the small metal clip using a small flat-head screwdriver or any pointed tool.

That's it! This will allow you to remove the gear knob, as it is held in place only by that small metal clip just removed. Once done, if you want to remove the gaiter as well, you can do so easily: just pull the entire plate to which it is attached and remove it from the gear lever.

For reassembly, proceed in reverse order.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on Toyota RAV 4
How to Remove the Gear Knob on Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Is the gear knob on your Toyota RAV 4 damaged? Here’s how to replace it inside the car. Take the knob in your hands and turn it to the left until you…
How to Replace the Gear Knob of the Toyota Rav 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the gear knob of the Toyota Rav 4, detach the clips securing the leather gaiter to the knob itself. Once the gaiter is detached, lower it …
How to Replace the Gear Knob on a Toyota RAV 4
How to Replace the Gear Knob on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the gear knob on a Toyota RAV 4, lower the leather gaiter completely located under the knob: once the leather covering is lowered, you can…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos