Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Repair

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
This video is currently unavailable

Using a plastic tool to avoid damaging the bodywork, pry at the sides of the climate control and radio panel to release the plastic clips and remove it. Still using a plastic tool, pry at the sides of the console panel and then remove it to access the retaining screws of the radio.

Unscrew the screws of the radio panel to completely slide the radio out of its housing.

Gently remove the radio by lifting it to disconnect the connectors located at the back. Install the new radio by reversing the procedures.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How do you reset the radio in the Toyota Auris?
How do you reset the radio in the Toyota Auris?
Toyota Auris (2018-2024 / E210) To reset the radio of the Toyota Auris, first turn on the ignition by inserting the ignition key into the corresponding slot. Once the ignition is on…
Where are the Fuses in the Toyota Auris?
Where are the Fuses in the Toyota Auris?
Toyota Auris (2007-2012 / E150) In the Toyota Auris, the fuses are contained in dedicated fuse boxes installed in the vehicle: there are two in this type of car. The first is locate…
Diagram and positioning of the fuse boxes of the Toyota Auris
Diagram and positioning of the fuse boxes of the Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, we will see the information that will show us the layout and positioning of the fuse boxes of the Toyota Auris. First, we open the car…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos