Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Diesel fuel filter

See other generations:
Video tutorial

Replacing the fuel filter is a simple task that should be done regularly for optimal performance. The filter is located under the rear seat, which needs to be removed.

Start by disconnecting the fuel connector, lift the filter upwards, and disconnect the fuel lines, allowing the diesel to drain. Unscrew the filter cover and remove it. The filter cartridge is attached to the cover and can be removed by applying some force.

Replace the cartridge and refit the cover, replacing the rubber seal. Reconnect the fuel lines and the connector.

Clean up any fuel spills thoroughly to prevent fire hazards.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on a Toyota Corolla
Replacing the Fuel Filter on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) How to replace the fuel filter on a Corolla? Remove the seats and the metal cover underneath. Unscrew the securing screws of the metal cap (if presen…
How to replace the fuel filter on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To replace the fuel filter on a Toyota Corolla, you need to remove the retaining clips that secure the rear seats in their housing. Once the seats ar…
How to Replace the Fuel Filter on the Toyota Corolla Mk3
How to Replace the Fuel Filter on the Toyota Corolla Mk3
Toyota Corolla (2006-2013 / MK 3) This guide shows how to replace the fuel filter on the Toyota Corolla Mk3. After lifting the rear seat cushion in the cabin, you can access the fuel …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos