Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel pump

See other generations:
Video tutorial

Before you begin, open the rear doors of your Toyota Yaris. Start by prising off and removing the covers of the bolts securing the rear seat bench, then unscrew and remove the underlying bolts.

Next, detach and remove the rear seat bench itself. This will give you access to the top cover of the fuel pump, which you need to unclip and remove, then disconnect the corresponding electrical connector.

Proceed to disconnect the hoses attached to the pump, then unscrew the retaining ring. At this point, you can extract the pump from its housing, successfully completing the disassembly.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to replace the fuel pump in the Toyota Yaris?
How to replace the fuel pump in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you can see how to remove the fuel pump in the Toyota Yaris, a very simple and quick operation. First, ensure the key is not insert…
How to replace the fuel filter of the Toyota Yaris.
How to replace the fuel filter of the Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel filter of the Toyota Yaris. First, let's ope…
How to replace the fuel pump on a Toyota Yaris
How to replace the fuel pump on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the fuel pump on a Toyota Yaris, you need to loosen the bolts securing the rear seats, allowing them to be lifted for access to the lower …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos