Do it yourself
Frequently asked questions about cars and motorcycles

How do I replace the Toyota Yaris fuel pump?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuel pump

In order to replace the Toyota Yaris fuel pump it is necessary to loosen the bolts that secure the rear seats of the car, so that they can be raised giving access to the lower components. By removing the relevant panel and unscrewing the screws that secure the pump to its housing, it will be possible to remove it so that it can be replaced with a new spare part. Once the new filter has been inserted in its housing, it will be necessary to fix it with the screws and connect it to the appropriate connectors, lowering the rear seats and fixing them with the relative bolts.


Posted on 1 August 2024 by ScegliAuto



How do you replace the fuel pump of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the fuel pump of the Toyota Yaris, you need to remove the rear seat of the car so that you can access the underlying components.
Toyota Yaris fuel pump disassembly
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see the steps that will allow us to disassemble and replace the fuel pump or float on the Toyota Yaris. First of al
Toyota Yaris 1.0 Petrol fuel pump disassembly
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a Toyota Yaris first series 1.0 Petrol. First we go to recline the front seats and the r

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2011-2019 - Where can I find the inertia switch on the Toyota Yaris? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos