Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Speedometer on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Onboard computer

First of all, remember to disconnect the battery (just remove the negative terminal). The plastic above the display is held by a single screw, so undo it and gently pull off the plastic. You will now find another single screw holding the frame in place. Remove this as well, and it can now be taken off. Now you will notice three metal levers that hold the display: gently push them with your finger and the speedometer will come out of its housing. Disconnect its cables and fit the new part. Nothing easier, just 2 screws and 3 metal clips! Good luck!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Toyota Corolla MK2
How to Reset the Oil Light on a Toyota Corolla MK2
Toyota Corolla (2000-2007 / MK 2) This procedure works for Toyota Corollas with an electronic oil maintenance light (usually models from the late '90s to early 2000s). Insert the key …
How to Reset the Service Light in a 2017 Toyota Corolla?
How to Reset the Service Light in a 2017 Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) When the Service light comes on in your 2017 Toyota Corolla, it indicates that the service interval is approaching. You need to change the engine oil…
How to reset the service on the Toyota Corolla?
How to reset the service on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial, see how to reset the service on the Toyota Corolla, an extremely simple and quick operation, to be performed only after completing …

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos