Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tyre pressure light on Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure to reset the tyre pressure light on a Toyota Aygo is very simple, yet unknown to many. Get into the car and turn the key to the ignition position.

Instead of starting the engine, press the start button twice without pressing the pedals. Now you may notice the tyre pressure light illuminated: open the glove compartment and locate the reset button present in this compartment, clearly shown in the video.

Press and hold it for a few seconds until the reset is complete. It is advisable to check the condition of the tyres before this procedure.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Reset the Tyre Pressure Light on a Toyota Aygo?
How to Reset the Tyre Pressure Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) Resetting the tyre pressure light on a Toyota Aygo is an extremely simple and quick operation. Before doing this, ensure that you have restored the c…
How to Reset the Tyre Pressure Light on a Toyota Aygo?
How to Reset the Tyre Pressure Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) Resetting the tyre pressure light on a Toyota Aygo, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos