Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Centre Tunnel on Toyota Yaris mk4

Model: Toyota Yaris MK 4 - Years 2020-2026
Part: Center console tunnel

First, remove the gear knob by simply unscrewing it. Once done, manually remove the small side trim next to the radio, as shown in the video, and detach the plastic under the radio that has the buttons, disconnecting the connectors. Remove all the plastic around the gear lever by prying from underneath. Now, remove the remaining plastic of the centre tunnel by lifting it from the rear, and again, disconnect the connectors of the buttons. As you can see, this is a very simple operation that requires no special tools. Reverse the steps for reassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (1999-2005 / Xp10) In today's video tutorial, we will see the procedure to remove and replace the gear knob gaiter on the Toyota Yaris XP 10, first generation. First, g…
Toyota Yaris (1999-2005 / Xp10) Want to replace the gear knob on your Toyota Yaris? In this video, see how to remove it from the centre console. Use a plastic lever to disconnect th…
Toyota Yaris (2011-2019 / Xp130) In this article we will illustrate, with the help of a video tutorial, how to adjust the handbrake in the Toyota Yaris. The procedure is simple and t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos