|
Do it yourself
| |||
| ||||
Replacing Fuses on a Toyota Car
Model: Toyota Aygo
Ab10, MK 1
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
Open the bonnet and prop it up. Looking at your car, you will notice a box with a classic black top cover to the right of the engine compartment. Remove the plastic cover by pulling it off and detaching it from the clips with some force, and you will find the first fuse box with a white clip to remove them. While seated in the driver's position, look down to your left and you will find a black cover securing a small compartment. Remove the cover and voilà! You have discovered the internal fuse box! At this point, simply replace the affected fuse and you're done. If the fuse related to the radio has blown but you don't know which one it is, consult the instruction manual provided.
Updated on 17 April 2026 by ScegliAuto
Related tutorials
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
In this guide we will see information related to the diagram and positioning of the fuse boxes of the Toyota Aygo. First of all, let's get on board t…
Toyota Aygo
(2005-2014 /
Ab10, MK 1)
In this guide, we will see the diagram and positioning of the fuse boxes of the Toyota Aygo, following the instructions below. First of all, get on b…
Toyota Aygo
(2005-2014 /
Ab10, MK 1)
Below are the instructions that will help you locate the positioning and diagram of the fuses for the Toyota Aygo, in simple steps. First, open the b…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.145
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |