Do it yourself
| ||||
|
Toyota Prius - Video tutorial
Model: Toyota Prius
Xw50, MK 3
- Years 2016-2023 Today we will see how to remove and replace the remote control battery of the electronic key on a third series Toyota Prius, in simple steps. First we take our remote control and start by removing the key from the remote control, moving the small lever; after which we insert the key itself inside the hole to open the remote control in two parts, as shown in the video. At this point we remove and replace the battery that we find inside, with the right type (in this case a 3 V CR 2032); we just have to reassemble everything, applying the reverse procedure!
Posted on 15 February 2024 by ScegliAuto
How to replace the Toyota Prius remote control battery
Toyota Prius (2009-2015 / MK 2, Xw30) Let's see how to disassemble the remote control of the Toyota Prius and how to replace the battery. We take our ignition remote control and extract t
How to replace the Toyota Prius remote control battery?
Toyota Prius (2016-2023 / Xw50, MK 3) As we can see in this tutorial, changing the remote control battery on your Toyota Prius is a very simple and cheap operation. To do this, we will ne
How to change the battery in the Toyota Prius remote control.
Toyota Prius (2016-2023 / Xw50, MK 3) How to change the battery in the Toyota Prius remote control. The remote control has a narrower top and wider bottom. The safety key is stored in the Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the Renault Master AdBlue warning lightIf when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |