Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on the Toyota Land Cruiser J120

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fog lights

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the front fog light, along with its bulb, on the Toyota Land Cruiser J120. First, remove the front fog light by taking out the retaining clip found inside; use a flat screwdriver as shown in the video.

Disconnect the electrical connector to remove and replace the fog light bulb with a new one of the correct type; then, reassemble the entire front light, following the tutorial video to the end!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
How to reset the "T-Belt" light in the Toyota Land Cruiser?
How to reset the "T-Belt" light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this tutorial we can see how to reset the "T-Belt" light in the Toyota Land Cruiser, an extremely simple and quick operation, to be done only afte…
How to Reset the Service Light on a 2008 Toyota Land Cruiser
How to Reset the Service Light on a 2008 Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this mini guide for 2008 Toyota Land Cruiser owners, learn how to manually reset the service light. First, insert the key and turn on the ignition…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos