Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "T-Belt" light in the Toyota Land Cruiser?

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

In this tutorial we can see how to reset the "T-Belt" light in the Toyota Land Cruiser, an extremely simple and quick operation, to be done only after completing the scheduled maintenance work, namely the replacement of the timing belt. First of all, let's go inside the cabin, then turn on the instrument panel and reach the odometer "ODO" using the button on the dashboard.

Then turn off the panel, turn it back on while holding down the same button, release it after about 5 seconds and hold it down again. At this point, all that remains is to restart the vehicle and verify that the reset was successful.


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to reset the T-BELT light in the Toyota Land Cruiser?
How to reset the T-BELT light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this tutorial, we can see how to reset the T-BELT light in the Toyota Land Cruiser, an extremely simple and quick operation to be carried out only…
How to Reset the T-Belt Light on the Toyota Land Cruiser?
How to Reset the T-Belt Light on the Toyota Land Cruiser?
Toyota Land Cruiser (1996-2002 / J90, MK 8) You can completely clear the T-Belt light on the Toyota Land Cruiser by pressing the button located on the left side of the instrument panel while it…
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
Toyota Land Cruiser (2007-2021 / MK 11, J200) From the video and standard Toyota procedures, here are the steps to reset the T-belt light on the Land Cruiser 150: Turn on the ignition (ON) withou…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos