Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

From the video and standard Toyota procedures, here are the steps to reset the T-belt light on the Land Cruiser 150: Turn on the ignition (ON) without starting the engine, then press the trip meter button (TRIP/ODO) to switch to "ODO" mode (total odometer, not partial) and turn off the ignition (OFF). Now, hold down the trip meter button and, while holding it, turn on the ignition; continue holding until the T-BELT light flashes and then turns off (usually after 5-10 seconds), then release the button.

Turn off and restart the ignition to check that the light is off. This light does not indicate that the belt is broken or about to break.

It is merely a maintenance reminder (usually comes on every 62,000 miles or 5 years, depending on the manufacturer's guidelines).


Posted on 16 June 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Toyota Land Cruiser
Replacing the Timing Belt on a Toyota Land Cruiser
Toyota Land Cruiser (1990-1997 / MK 7, J80) Prepare to replace the timing belt on a Toyota Land Cruiser. Lift the engine bonnet; remove the cooling fan to access the belt kit. Once these steps …
Replacing the Timing Belt on the Toyota Land Cruiser V8
Replacing the Timing Belt on the Toyota Land Cruiser V8
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this guide, discover how to remove and replace the timing belt on the 2008 Toyota Land Cruiser with a V8 engine. First, remove the front part of y…
How to reset the "T-Belt" light in the Toyota Land Cruiser?
How to reset the "T-Belt" light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this tutorial we can see how to reset the "T-Belt" light in the Toyota Land Cruiser, an extremely simple and quick operation, to be done only afte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos