Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the T-BELT light in the Toyota Land Cruiser?

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Service warning light

In this tutorial, we can see how to reset the T-BELT light in the Toyota Land Cruiser, an extremely simple and quick operation to be carried out only once the timing belt has been replaced. First of all, let's go inside the cabin, then insert the key and turn on the dashboard. Next, reach the odometer "ODO" using the button on the dashboard, turn off the dashboard, turn it back on while holding down the same button and keep it in position for 5 seconds. At this point, all that's left to do is release the button, press it a second time for another 5 seconds, and restart the vehicle.

Posted on 17 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "T-Belt" light in the Toyota Land Cruiser?
How to reset the "T-Belt" light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) In this tutorial we can see how to reset the "T-Belt" light in the Toyota Land Cruiser, an extremely simple and quick operation, to be done only afte…
How to Reset the T-Belt Light on the Toyota Land Cruiser?
How to Reset the T-Belt Light on the Toyota Land Cruiser?
Toyota Land Cruiser (1996-2002 / MK 8, J90) You can completely clear the T-Belt light on the Toyota Land Cruiser by pressing the button located on the left side of the instrument panel while it…
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
Toyota Land Cruiser (2007-2021 / J200, MK 11) From the video and standard Toyota procedures, here are the steps to reset the T-belt light on the Land Cruiser 150: Turn on the ignition (ON) withou…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos