Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the T-Belt Light on the Toyota Land Cruiser?

Model: Toyota Land Cruiser MK 8, J90 - Years 1996-2002
Part: Warning light – error code

You can completely clear the T-Belt light on the Toyota Land Cruiser by pressing the button located on the left side of the instrument panel while it is off. Continue to hold the button while inserting the ignition key into the lock to turn it and power up the panel. Now you can release the button and press it again. You will need to repeat this operation twice until the light disappears. At the end of the procedure, the panel can be turned off completely to finish.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the T-BELT light in the Toyota Land Cruiser?
How to reset the T-BELT light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) .. In this tutorial, we can see how to reset the T-BELT light in the Toyota Land Cruiser, an extremely simple and quick operation to.. …
How to reset the "T-Belt" light in the Toyota Land Cruiser?
How to reset the "T-Belt" light in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) In this tutorial we can see how to reset the "T-Belt" light in the Toyota Land Cruiser, an extremely simple and quick operation, to be done only afte…
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
Toyota Land Cruiser (2007-2021 / J200, MK 11) From the video and standard Toyota procedures, here are the steps to reset the T-belt light on the Land Cruiser 150: Turn on the ignition (ON) withou…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos