Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2008 Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Service warning light

In this mini guide for 2008 Toyota Land Cruiser owners, learn how to manually reset the service light. First, insert the key and turn on the ignition. Press the button below the speedometer several times until you see "Trip A" on the mini display. Now, turn off the ignition and hold down the same button used earlier. Finally, turn the ignition back on and release the button once the reset is complete.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to manually reset the service light of the Toyota Land Cruiser
How to manually reset the service light of the Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / J200, MK 11) To manually reset the service light that continues to come on the display of the instrument panel of your Toyota Land Cruiser, simply follow the step…
How do you reset the Service light on a Toyota Land Cruiser?
How do you reset the Service light on a Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) To completely eliminate the Service light displayed on the instrument panel of the Toyota Land Cruiser, you need to turn on the instrument panel so t…
How to Reset the Tyre Pressure Warning Light on the Toyota Land Cruiser?
How to Reset the Tyre Pressure Warning Light on the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) To reset the tyre pressure warning light on the Toyota Land Cruiser, first inflate the tyres to the correct pressure value: this value is indicated o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos