Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Bumper on a Toyota Camry

Model: Toyota Toyota Various
Part: Rear bumper

To remove the rear bumper from the Toyota Camry, loosen the screws located inside the wheel arch. In addition to these screws, you will need to loosen those found at the bottom of the bumper, near the wheel arch. Other bolts to unscrew are located at the lower centre of the bumper; by lifting the boot, you will find two caps near the rear lights, under which there will be another two screws to remove. Once all these screws have been removed, you can detach the old bumper and replace it with a new one.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Toyota Various The battery of the remote control used for the replacement of Toyota vehicles C HR, Corolla, Camry, and RAV4 is the CR2032 model from "Duracell". To …
Toyota Toyota Various To dismantle the dashboard of a Toyota Camry, first loosen the screws securing the airbag on the steering wheel and remove it. This will allow you to…
Toyota Toyota Various If the smart key for your Toyota Vitz has stopped working due to a completely dead battery, you must replace it, and below we will explain how to do …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos