Do it yourself
| ||||
|
Toyota Land Cruiser - Video tutorial
Model: Toyota Land Cruiser
MK 11, J200
- Years 2007-2021 In order to reset the Toyota Land Cruiser tire pressure warning light, you must first check that all the tires are at the correct inflation pressure, indicated on the sticker placed in the driver's door pillar. To proceed with the reset operation, turn on the instrument panel and hold down the SET button, located in the lower part of the steering column, in correspondence with the brake pedal. The button must be held down until the light flashes and then goes off. To verify that the reset has taken place, the instrument panel must be switched off and on again.
Posted on 4 March 2024 by ScegliAuto
How do you reset the tire pressure warning light on a Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / MK 11, J200) To reset the tire pressure warning light on the Toyota Land Cruiser, you first need to inflate the tires to the correct pressure value indicated on t
How to reset the tire indicator light in the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / MK 11, J200) Resetting the tire pressure warning light in the Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and quick operation. Bef
How do you reset the AdBlue light on the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / MK 11, J200) The AdBlue warning light that appears on the dashboard of the Toyota Land Cruiser indicates that the level of additional fluid inside the tank is alm Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the Renault Master AdBlue warning lightIf when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |